Casella-cel CEL-368 Manual de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 99
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
6. ROUTINE OPERATIONS
6.1 Use With Current Settings
When has been pressed to avoid recalibration or after a field ac-
curacy check has been completed (Section 5.4), the SETUP menu will
be displayed showing the current measurement settings.
1. If these settings are suitable for the proposed task, press
again to start measurement using them.
The instrument displays the current status screen.
This is a "real time" display showing the instantaneous sound level,
time weighting and logging status. The current measurement
range is highlighted and can be changed from this screen by
pressing .
Note: Add 20 dB to ALL indicated sound levels while an MK-301 is fitted.
If all data stores are occupied so that no free space is available
for any proposed run, a "NO MEMORY FOR NEW RUN USE
MEM-DEL" message is displayed.
EXIT
EXIT
SELECT
Current Logging Status
Battery Condition
Current Parameter Settings
Measured SPL
Battery Voltage
Instrument Time
CEL-268/368 Handbook
Page - 51
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 98 99

Comentarios a estos manuales

Sin comentarios