Casella-cel Nomad portable weather station Manual de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
Operating temperature: -25° to +80°C
6.2.3 General Specification
Part number: 187012B
Supply voltage: 8 to 24 V (supplied from environmental case)
Power consumption: Typically 10 mA at 12 V
Output calibration
Temperature: 0 to 1 V for -40 to + 60°C
Humidity: 0 to 1 V for 0 to 100% RH
6.3 Wind Speed Sensor
The sensitive three cup anemometer is
mounted at one end of the sensor head
cross-arm. The rotational speed is monitored
using an infra-red light source, interrupter
and optical sensor that provides 20 pulses
from 0 to 5 V per revolution. This
non-contacting design can measure wind
speeds up to 75 m/sec.
The instrument has an anodised
aluminium alloy outer case that offers a
durable, all-weather construction suitable for
installation in harsh environments.
An output from this sensor is led to
a terminal box on the sensor cross arm, from
where a single sensor cable is taken to the
7-pin socket on the bottom panel of the environmental case.
6.3.1 Wind Speed Sensor Specification
Part number: 178031C
Sensor type: Three cup anemometer
Transducer: Optical interrupter
Maximum wind speed: 75 m/s
Starting velocity: Typically 0.3 m/s
Distance constant: Typically 3.5 m/s
Time constant: Typically <0.5 s
Resolution: 7.84 cm
Non-linearity: <±0.6 %
Accuracy: ±0.3 m/s below 3 m/s
±3% over 3 m/s
Output calibration: 12.75 Hz/m/s
Output: 20 pulses per revolution 0 to 5 V
Operating temp: -20°Cto+70°C
Stabilisation time: <1 sec from power on
Supply voltage: 6 - 28 V DC (supplied from environmental
case)
Power consumption: 3 mA
6.4 Wind Direction Sensor
The weather vane is mounted at the other end of the sensor head cross-arm
from the anemometer.
DO NOT loosen the fitting of the weather vane, as this carries a
guide mark “N” that must point north to orient the cross arm correctly.
The wind vane is a small lightweight GMR design that offers a rapid
response to changes in wind direction with virtually friction free sensing. The
01057
Figure 12: Wind speed sensor
Standard Sensors
Page 43 of 68
NOMAD Portable Weather Station
Users Handbook
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Comentarios a estos manuales

Sin comentarios